H62
Brass Sheet
A brass sheet for formed hardware, panels and decorative components. Specify temper and surface quality together with thickness and sheet dimensions.
01 / MATERIAL OVERVIEWMaterial Features
H62 is a wrought brass grade used for sheet components that combine mechanical function and appearance. Select the material condition for the severity of bending, stamping or drawing. For rod-based components, explore H59 месингов прът; for electrical distribution components, compare C11000 copper busbar and its application-specific properties.
Sheet Forming
Suitable for bending and stamping when temper and tooling are matched to the part.
Condition Selection
A softer condition favors forming; a harder condition offers different strength and springback behavior.
Decorative Appearance
Specify the visible face, polishing direction and acceptable surface marks.
Cut Blanks
Cut-to-size sheets can support subsequent presswork and fabrication.
Assembly Options
Define the selected joining method and any effect on finish or distortion.
Controlled Specifications
Grade chemistry does not establish one universal hardness, elongation or forming limit.
02 / TECHNICAL DATAMaterial Reference
| Item | Reference / requirement |
|---|---|
| Copper Cu | 60.5–63.5% |
| Zinc Zn | Balance |
| Lead Pb | ≤0.08% reference limit |
| Iron Fe | ≤0.15% reference limit |
| Delivery condition | Specify temper and thickness |
Reference values support material selection. Confirm the complete chemistry, mechanical properties and acceptance criteria in the purchase specification and batch report.
03 / CONDITION & PERFORMANCESpecify the Right Condition
Specify the required temper and mechanical acceptance criteria for the sheet thickness. Use trial pieces for demanding formed shapes and confirm whether intermediate processing is needed.
| Requirement | What to confirm |
|---|---|
| Material condition | Exact grade and temper or delivery condition |
| Mechanical properties | Applicable limits for the product form and dimensions |
| Inspection | Test method and required material documentation |
04 / DIMENSIONS & SUPPLYDimensions for Your Application
| Item | Ordering guidance |
|---|---|
| Thickness | Specify thickness and tolerance |
| Width × length | Provide sheet or finished blank dimensions |
| Flatness & squareness | State acceptance requirements |
| Surface protection | Specify visible faces, interleaving or protective film |
Provide dimensions in millimeters and identify whether they refer to incoming stock or finished parts. Available sizes, quantity and lead time are confirmed in the quotation.
05 / APPLICATIONSTypical Applications
Stamped Hardware
Washers, brackets and similar components made to drawing.
Decorative Panels
Visible sheet parts with agreed finish and handling protection.
Electrical Hardware
Formed parts selected for the required mechanical and electrical function.
Architectural Fittings
Trim and hardware designed for the service environment.
Drawn Components
Shells and shallow formed parts after process validation.
Custom Blanks
Cut sheets prepared for further fabrication.
06 / FABRICATION & FINISHPlan the Fabrication Route
| Operation | Details to define |
|---|---|
| Blanking & cutting | Define burr direction, edge condition and cutting tolerance. |
| Bending | Specify inside radius and orientation relative to the rolling direction. |
| Drawing | Confirm tooling and material condition for the required forming depth. |
| Polishing & plating | Agree on finish, coating thickness and masking of functional areas. |
07 / PACKING & INSPECTIONPacking, Handling & Inspection
Protect the Material
Specify package size and unit weight for your handling equipment. Agree on edge protection, separation between pieces and moisture protection appropriate to the shipment.
Store & Handle Carefully
Store dry and supported. Keep contact surfaces and finished faces free from contamination and handling damage. Preserve labels for batch identification.
Check on Receipt
- Match grade, condition and batch identification to the order.
- Check quantity, dimensions and packaging condition.
- Inspect visible surfaces and edges before fabrication.
- Review the agreed material and inspection documents.
08 / FREQUENTLY ASKED QUESTIONSSelection FAQs
Which temper should I order?
Choose it according to the forming operation and required final strength; include the condition in the inquiry.
Can H62 be substituted for another brass sheet?
Confirm chemistry, mechanical properties, finish and the applicable standard before substitution.
Can the surface be polished or plated?
Yes, subject to a suitable process. Define the appearance or functional requirements and reference sample.
09 / ORDERING GUIDESend a Complete Specification
Please include: H62 месингова ламарина; temper; thickness × width × length; quantity; flatness; surface finish; protective packaging and material report requirements.
Agree on the applicable sheet delivery standard and chemistry requirements, including the relevant GB/T 5231 edition where specified.
Include a drawing for processed parts and identify any critical dimensions. Final availability, pricing, minimum order quantity and delivery schedule are subject to quotation.
Reviews
There are no reviews yet.