#a6063{max-width:1100px;margin:auto;font:16px/1.7 Arial,sans-serif;color:#263746}#a6063 *{box-sizing:border-box}#a6063 .hero{display:grid;grid-template-columns:1fr 1fr;background:#12364a;color:#fff}#a6063 .copy{padding:42px}#a6063 h1{font-size:46px;line-height:1.1;color:#fff}#a6063 h2{color:#12364a;border-left:5px solid #15868b;padding-left:12px;margin-top:34px}#a6063 img{width:100%;height:auto}#a6063 table{width:100%;border-collapse:collapse;margin:16px 0}#a6063 th{background:#173c51;color:#fff;text-align:left}#a6063 th,#a6063 td{padding:11px;border:1px solid #dbe3e8}#a6063 tr:nth-child(even){background:#f4f7f8}#a6063 .grid{display:grid;grid-template-columns:repeat(3,1fr);gap:14px}#a6063 .card{background:#eef5f5;padding:18px;border-top:3px solid #15868b}#a6063 .note{background:#edf5f7;padding:14px;border-left:4px solid #15868b}#a6063 section{padding:22px 3%}@media(max-width:700px){#a6063 .hero,#a6063 .grid{grid-template-columns:1fr}#a6063 h1{font-size:34px}}

6063 SERIES · EQUAL-LEG EXTRUSION

6063-T5 Equal Aluminum Angle

Lightweight, corrosion-resistant equal-leg aluminum angle for frames, trim, guards and general assemblies. It combines a clean extruded surface with practical cutting, drilling, fastening and finishing.

6063-T5 equal aluminum angle profiles stacked on a wooden pallet, AI-generated product image

Product Advantages

Equal 90° Legs
Two matching nominal leg widths provide simple locating and two mounting faces.

Clean Extruded Finish
6063 is widely chosen when profile appearance and finish response matter.

Low Weight
The open L-section supports practical framing without the mass of solid bar.

Corrosion Resistance
Suitable for many indoor and outdoor applications with correct design.

Easy Fabrication
Suitable for sawing, drilling, fastening and qualified aluminum welding.

Finish Options
Mill finish, anodizing and powder coating available subject to quotation.

Chemical Composition · wt.%

Typical 6063 limits are shown below. The applicable purchase standard and material certificate govern the supplied batch.

Element	Limit	Element	Limit
Silicon (Si)	0.20–0.60	Magnesium (Mg)	0.45–0.90
Iron (Fe)	≤0.35	Copper (Cu)	≤0.10
Manganese (Mn)	≤0.10	Chromium (Cr)	≤0.10
Zinc (Zn)	≤0.10	Titanium (Ti)	≤0.10
Other, each / total	≤0.05 / ≤0.15	Aluminum (Al)	Balance

Mechanical and Physical Properties

T5 temper: cooled from an elevated-temperature shaping process, then artificially aged. Values depend on the governing specification and profile thickness.

Wall thickness	Tensile strength	0.2% yield strength	Elongation
Up to 12.50 mm	150 MPa min.	110 MPa min.	8% min.
Over 12.50 to 25.00 mm	145 MPa min.	105 MPa min.	8% min.

Typical property	Reference value
Density	Approximately 2,700 kg/m³
Elastic modulus	Approximately 69 GPa
Thermal conductivity, T5	Approximately 209 W/(m·K)
Electrical conductivity, T5	Approximately 55% IACS

Reference basis: Hydro 6063 extrusion alloy data. Confirm standard, edition, cross-section and inspection certificate for contractual acceptance.

Equal-Leg Geometry

A · LEGA · LEGt · THICKNESS

Specify the section as A × A × t, where A is each nominal leg width and t is wall thickness. Real extrusions include inside and outside corner radii governed by the die and specification. For a closed hollow frame member, see 6063-T5 aluminum square tube; for a solid rectangular mounting blank, compare 6061-T6 aluminum flat bar.

Common Enquiry Sizes

These are common enquiry examples, not a live-stock promise. Typical lengths are 1–6 m or cut to size.

A × A × t · mm	Approx. mass	Typical use
10 × 10 × 1.0	0.051 kg/m	Light trim
15 × 15 × 1.5	0.115 kg/m	Guards and small frames
20 × 20 × 2.0	0.205 kg/m	General framing
25 × 25 × 3.0	0.381 kg/m	Cabinets and equipment frames
30 × 30 × 3.0	0.462 kg/m	Panels and brackets
40 × 40 × 4.0	0.821 kg/m	Medium-duty assemblies
50 × 50 × 5.0	1.283 kg/m	Larger frames and supports

Mass formula: t × (2A − t) × 0.00270 kg/m, with A and t in mm. This sharp-corner estimate excludes radii and tolerances.

Fabrication and Surface Finish

Process	Ordering guidance
Saw cutting	Specify length tolerance, end squareness and deburring.
Drilling / fastening	Define hole positions, edge distance and galvanic isolation.
Welding	Use a qualified aluminum procedure; heat-affected zones may have lower strength.
Anodizing	Specify pretreatment, thickness, color range and visible-face criteria.
Powder coating	Specify preparation, coating system, color, gloss and masking.

Applications

Equipment frames and enclosures

Architectural trim and edge protection

Guards, screens and framed panels

Display and cabinet assemblies

Solar and electrical secondary framing

General cut, drilled or joined fabrication

Product Presentation and Quality Checks

Long 6063-T5 equal aluminum angle profiles in a warehouse, AI-generated illustration

The image is an AI-generated presentation illustration and does not certify an actual batch, dimension, finish or packing method. Incoming inspection should confirm alloy, temper, A × A × t, ordered length, straightness, twist, cut ends, surface condition and documentation.

Packing and Ordering

Long profiles should be supported, separated and bundled to control bending and handling marks. Please provide: 6063-T5; A × A × t; length; quantity; applicable standard; tolerances; straightness and twist limits; cut-end condition; surface finish; packing; and certificate requirements.

Attach drawings for drilled or machined parts. Availability, minimum order quantity, processing scope, price and delivery schedule are subject to quotation.

PRODUCT CATALOG

Uncategorized

6063-T5 Equal Aluminum Angle